Automatic Preset Tuning - Yamaha RX-V692 Manual De Instrucciones

AUTOMATIC PRESET TUNING

You can also make use of an automatic preset tuning function for FM stations only. By this function, this unit performs automatic
tuning and stores FM stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the
manual preset tuning method on page 27.
To store stations
1
FM/AM
2
MEMORY
MAN'L/AUTO FM
Press and hold for
about 3 seconds.
3
To tune to higher frequencies, press right side once.
To tune to lower frequencies, press left side once.
* If the TUNING button is not pressed, in a while, the
automatic preset tuning begins automatically toward higher
frequencies.
The automatic preset tuning begins from the frequency
currently displayed. Received stations are programmed to
A1, A2 ... A8 sequentially.
* If more than 8 stations are received, they are also
programmed to the preset station numbers on other groups
(B, C, D and E) in that order.
If you want to store the first station received by the
automatic preset tuning to a desired preset station
number.
If, for example, you want to store the first received station to
C5, select "C5" by using the A/B/C/D/E button and the preset
station number selector buttons after pressing the MEMORY
button in step 2. Then press the TUNING button. The first
received station is stored to C5, and next stations to C6, C7 ...
sequentially.
If stations are stored up to E8, the automatic preset tuning is
finished automatically.
28
RX-V692 RX-V592
FM
RX-V692
RX-V592
PRESET
PRESET
MEMORY
MEMORY AUTO
AUTO TUNING
Flashes.
DOWN TUNING UP
l6
20 l2
28 8
40 4
60 2
0
–dB
1 2 3
When the automatic preset tuning is finished
The display shows the frequency of the last preset station.
Check the contents and the number of preset stations by
following the procedure of the section "To recall a preset
station" on page 27.
To recall a preset station
Simply follow the procedure of the section "To recall a preset
station" on page 27.
Notes
You can replace a preset station by another FM or AM
station manually by simply following the procedure of the
section "To store stations" on page 27.
If the number of received stations is not enough to be stored
up to E8, the search is finished automatically after searching
all frequencies.
With this function, only FM stations with sufficient signal
strength are stored automatically. If the station you want to
program is weak in signal strength, tune to it in monaural
manually and program it by following the procedure of the
section "To store stations" on page 27.