Inserting The Batteries - Microlife BP3GY1-2N Manual De Instrucciones

3. How do I get started?
3.1. Protective screen film
There is a protective piece of static film covering the
monitor's screen. Please remove it before use.

3.2. Inserting the batteries

After you have unpacked your device, insert the
batteries. The battery compartment is located on the
back of the device.
a) Remove the battery cover.
b) Insert the batteries (4 x size AAA 1.5 V),
observing the indicated polarity.
c) If a battery warning appears in the display, the
batteries are discharged and must be replaced.
Attention!
• After the low battery indicator appears, the
device won't function until the batteries have
been replaced.
• Please use AAA 1.5 V batteries and replace
them all at the same time.
• If the blood pressure monitor is not used for
long periods, remove the batteries from the
device.
• We do not recommend using rechargeable batteries.
3.3. Power switch / screen lock
To activate your monitor, push the switch
on the right hand side of the monitor to
the unlocked position.
12
Low Battery Indicator
unlocked
locked