Microlife BP3GY1-2N Manual De Instrucciones página 16

3.9. Connecting the cuff and monitor
Insert the yellow cuff tube connector into
the yellow socket on the left side of the
instrument.
If your cuff connector is another color,
please contact customer service as
additional steps are needed to obtain an
accurate reading.
3.10. Using the AC power adapter
You may also operate this monitor using
the included AC adapter. Use only the
included AC adapter to avoid damaging
the unit.
a) Ensure that the AC adapter and cable
are not damaged.
b) Plug the adapter cable into the AC
adapter port on the right side of
monitor.
c) Plug the AC adapter into a 110 V power
socket (U.S. or Canada).
d) Test that power is available by pressing
the START button.
Note:
• No power is taken from the batteries
while the AC adapter is connected to
the instrument.
• If the power is interrupted during a
measurement (e.g., by removal of the
adapter from the wall socket), the
instrument must be reset by removing
the plug from the instrument.
If you have any questions regarding the
AC adapter, call us at 1-800-568-4147.
15