Cordivari Ardesia Instrucciones De Uso página 11

display.
-Press [Chrono] button choose P1, P2, P3 programs.
For programming see paragraph 10.1
ECO Mode
This mode lowers the set temperature of 3°C regardless of other
radiator settings.
To activate / deactivate the function, press the dedicated [ECO]
button. (See paragraph 10.1)
Timer-2H Mode
Press the [mode] button until the displays shows the "2h".
The device is active at maximum power for 2 hours, up to a limit
temperature of 32°C. "Boost" mode automatically interrupts, after 2 hours
the thermostat goes back to the operating mode previously set.
the user can select other modes at any time, by pressing [Mode] botton.
.
Key Lock
It is possible to lock the devide to the "On / Stand-by" button to avoid
improper or involuntary use, such as protecting children or in a public
space.
To turn on/off the keypad, press the [mode] button for 5 seconds.
Adaptive Starting Control ASC*
This function, if activated, will turn on the radiator in advance of the
programmed (Max 2 hours) to ensure that the room has reached the
desired temperature at the set time.
NOTES: The function takes at least a couple of days to reach
maximum efficiency.
Open Window Detection function *
The "Open Window Detection" function enables detecting of an open
window by sensig a sudden decrease of the temperature in the room.
In such a case, the device deactivates the heating element for a
maximum of 30 minutes until at which point radiator will resume to
operate in the previously set state.
When the function is enabled, the window symbol on the display is
ON.
When the function is enabled and the window opening is detected,
the icon on the display flashes.
* To activate the functions, refer to paragraph 10.1
a) Set date and time
• Activate "Stand-by" mode and press the [chrono] button for more
than 5 seconds.
• With the [+] and [-] buttons, scroll through the menu to the Time
function, press [mode] to confirm.
• Day: The word "day" blinks for 2 seconds, with the [+] and [-] buttons
select the Day and confirm with the [mode] button.
• Time: Use the [+] and [-] buttons to select the time and confirm with
the [mode] button.
• Minute: Use the [+] and [-] buttons to select the minutes and confirm
with the [mode] button. When finished, the thermostat will exit the
programming menu.
Cod. 1910000000078 - nv00
b) Set programs for the Chrono mode (P1,P2,P3):
• Activate the "Chrono" mode using the [mode] button press the
[Chrono] button to choose wich of the programs P1, P2, P3 to set.
• Hold the [Chrono] button to set the time sequence.
Now a time sequence can be set for each day of the week. It starts with
day 1, the time zone is displayed, the desired sequence is selected
with the [+] and [-] buttons to select, for each hour, the "Comfort"
temperature (full bar) button [+] and the temperature "Night" (empty
bar) button [-].
Press [Mode] to confirm the first day setting, repeat the same
procedure for the remaining 6 days of the week; the day setting is
saved and it can be copied to the next day by pressing [Mode] button.
c) Enabling "Open window detection", "ASC", "wireless" "ECO"
functions;
a. The user can enable or disable these functions as follows:
b. Set the radiator to stand-by mode.
c. Press [chrono] key for more than 5 seconds.
d. With [+] and [-] keys, scroll the menu until "Func" function, press
[mode] key to confirm.
e. Press [+] or [-] keys to enable or disable the open window detection
function.
f. Press [mode] key to go to the selection of "ASC" function.
g. Press [+] or [-] keys to enable or disable the function.
h. Press [mode] key to go to the selection of "ECO" function.
i. Press [+] or [-] keys to enable or disable the function.
j. Press mode key again to go back to "Stand-by" mode.
Consumption indicator
N.B. When the " " is on, the heating element is active.
- 11 -
Max consumption: inticates the appliance
use maximum energy available
Medium consumption: it is advisable
to save energy consumption by reduce
temperatures setting.
Low consumption: the radiator is set
optimally
English