Install hitch: Raise the hitch into position over the exhaust and forward enough so that the
Tighten all 7/16" fasteners with torque wrench to 50 Ft. Lb. (68 N*M)
receiver clears the bottom edge of fascia. Align the holes in the hitch with the holes in the
vehicle frame and pull bolts that were installed earlier through the attachment holes. Install
Proper torque is needed to keep the hitch secure to the vehicle when towing.
conical washer (teeth side toward hitch) and nuts onto the bolts.
Reinstall the exhaust muffler.
©2020, 2021Horizon Global™ Corp - Printed in Mexico
Sheet 5 of 15
76364NP
4-20-21
Rev. B