LAVAZZA Firma INOVY MINI 300 Instrucciones De Empleo página 21

Place a glass below the dispensing spout. Press
the 'FREE DOSE' supply button and wait for wa-
ter to be supplied.
In case water is not supplied, repeat the cycle
several times (up to six times max.).
Empty the full tank by performing again the dis-
pensing cycles to end the rinsing procedure.
Empty the glass every time it reaches its maxi-
mum capacity level, by temporarily interrupting
the cycle.
STAND-BY FUNCTION
To ensure the energy conservation the machine
automatically passes to the stand-by mode after 30
minutes of not being used. The machine can be set
to the stand-by mode manually, first of the 30 min-
utes' time, by keeping both buttons pressed down
for at least 3 seconds. This mode is indicated by
the switching off of the buttons. The machine can
be reactivated by pressing the buttons again.
PREPARING THE MACHINE
PREPARATION FOR COFFEE BREWING
The coffee machine features two positions for
preparing the coffee: espresso cup/mug or glass.
Place the cup or small cup under the coffee dis-
penser, if you wish to have traditional espresso cof-
fee.
Remove the drop collecting tray to use a glass, if
you wish to have weak coffee.
EN
21