Coffee Dose Programming - LAVAZZA Firma INOVY MINI 300 Instrucciones De Empleo

EN

COFFEE DOSE PROGRAMMING

Measures are always programmed using the
same button; any other buttons are ignored. The
programmed amount of brewed coffee can be
changed by repeating the programming.
Place the mug/cup as shown (see
TION FOR COFFEE
Lift the capsule loading lever until it locks into po-
sition to open the pod fitting compartment.
Put a Lavazza
sule fitting compartment.
Lower the capsule loading lever to close the pod
fitting compartment.
24
PREPARING THE COFFEE
PREPARA-
BREWING).
capsule into the cap-
ESPRESSO
AROMATICO
100% ARABICA
Press and hold one of the two coffee delivery but-
tons. After about 3 seconds, the selected key will
flash and the coffee machine will enter the pro-
gramming mode.
Once the desired amount of coffee has been ob-
tained, stop supply by releasing the button.
If the programmed measure exceeds the maxi-
mum allowed (250 ml) the machine will automati-
cally stop delivery, the delivery button will blink
and the last programmed measure will be saved in
the memory. If there is a power failure during pro-
gramming, the last programmed value remains in
the memory. If during a dose programming, water
lack is indicated, the machine stops the supply and
the dose being programmed won't be saved.
Once filled the water tank, repeat the dose pro-
gramming procedure.