2.3 Description of main components
This machine mainly consists of the main post, auxiliary post, sliding table, bracket arm, arm lock, safety lock, cylinder, chain, power unit
and bottom beam. (See the figure below)
副立柱
Auxiliary post
锁臂装置
Arm lock
二节 托臂
bracket arm
Post:
Basic component, carrying sliding table, cylinder and other drive devices.
Sliding table:
Lifting component, installed inside the post, sliding up and down.
Bracket arm:
Lifting component, installed together with the sliding table, having contact with the support point of the vehicle to lift the
vehicle.
Arm lock:
Safety component, locking the bracket arm to prevent it from rotation.
Safety lock:
Safety component. When the hydraulic oil is drained, the safety block pushes the safety strip up to keep the sliding table
still.
Cylinder:
Drive component. When the hydraulic station pumps the high pressure oil into the lower chamber of the cylinder, the
piston rod rises and drives the sliding table to rise via the chain.
Chain:
Drive component. When the hydraulic station pumps the high pressure oil into the lower chamber of the cylinder, the
piston rod rises and drives the sliding table to rise via the chain.
Power unit:
Power component. The motor drives the pump to suck oil via the filter strainer and pump high pressure oil.
Bottom beam: Bridging component. The balance wire rope, oil pipe, and safety rope are arranged from the main post to the auxiliary post
by way of the gantry.
AE5001/AE5001-3
油缸
Oil cylinder
滑台
Sliding table
3-section
三节托臂
bracket arm
2-section
托盘
Tray
中文
EN
底梁
Bottom beam
DE
RU
KO
PT
JA
主立柱
Main post
动 力单元
Power unit
ES
33