CLEANING AND STORAGE
CLEANING Frequent and thorough cleaning of your motorbike will not only emphasise its appearance,
but will also improve its performance and lengthen the useful life of its components.
1.- Before cleaning:
a) Cover the exhaust pipe entrance to prevent water entering inside.
b) Check that the spark plug and all caps are firmly in place.
2.- If the engine is very dirty and greasy, use a degreasing agent. Do not apply degreasing agents on
the wheel axle nor on lubricated zones.
3.- Remover the degreasing agent, together with the dirt, using a hosepipe, but only with the minimum
pressure necessary.
WARNING:
Rieju cannot be held responsible for the use of degreasing agents which stain or cause deteriora-
tion the the motorbike components.
Rieju cannot be held responsible for any possible damage resulting from the use of pressurised
water to clean the motorbike.
25