SCHUBERTH BASECAP FLEXACTIVE Manual Del Usuario página 6

MAINTENANCE
The Basecap as well as damping elements should be checked prior to each use for
cuts, tears or other damage. In particular the closure system for adapting the size to
the individual head size must be checked carefully for damage and proper functioning
since it ensures the secure and firm fit of the cap.
If damage to the Basecap, the closure system or the damping elements is deter-
mined, it should be replaced by a new one immediately.
Please store and transport the SCHUBERTH Basecap FlexActive in the original
packaging.
Attention:
Never place adhesive tapes, dyes, stickers or self-adhering labels on
the Basecap. The protective effect may be impaired as a result.
CLEANING
Basecap FlexActive
Only clean the industrial bump cap with lukewarm soapy water. All parts may also be
treated with disinfecting agent (e.g. Heliosept Medical Spray) as required.
Do not use solvents. The protective effect may be impaired as a result.
Attention:
Remove the damping elements prior to each cleaning in order not
to permanently impair the protective effect.
10
DURATION OF USE
The SCHUBERTH Basecap should be replaced at intervals depending on the
conditions to which it is exposed. If the cap is used daily, and especially in the open,
we recommend replacement after 2 years. It can be necessary to replace it earlier if it
is used under particularly extreme conditions.
If the cap is only used occasionally for a few hours per week, e.g. for visitors, then a
useful life of up to 4 years can be expected from the date of purchase, provided that
the SCHUBERTH Basecap is stored in a dry place at a normal temperature and is not
exposed to direct sunlight.
ALTERATIONS TO THE CAP
In the series standard version, your SCHUBERTH Basecap conforms to the valid DIN
EN 812 standard and may therefore not be altered or fi tted with third party
components or accessories of any kind.
The replacement of individual parts is only permitted if these are identical to the
individual parts of the type-tested cap, or have been specially approved by
SCHUBERTH for exchange.
Wrong or third party inner trimmings (cushioning strips), the subsequent drilling of
holes for accessories or other alterations to the cap can impair its protective function
and lead to the approval being rescinded.
11