Publicidad
Enlaces rápidos
AUTOMOTIVE PRODUCTS, INC.
BULL BAR ASSEMBLY
ENSAMBLE DE PARRILLA
DELANTERA CON TIRÓN
LA BULL BAR
33-1000
33-1005
33-1430
33-1435
ITEM
QTY
1
1
BULL BAR ASSEMBLY
2,3
2
BRACKET, PASSENGER (2) AND DRIVER (3)
4
2
PLASTIC PLUG
5
4
RUBBER BUMPER
6
2
1/2-13 X 2.00" HEX HEAD BOLT
7
2
1/2" FLAT WASHER
8
2
1/2" LOCK WASHER
9
4
M10-1.25 X 35MM HEX HEAD BOLT
10
4
10MM FLAT WASHER
11
4
10MM LOCK WASHER
1
1
ENSAMBLE DE PARRILLA DELANTERA CON TIRÓN
2,3
2
SOPORTE
4
2
TAPONES DE PLÁSTICO
5
4
PARACHOQUES DE HULE
6
2
PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 2,00"
7
2
ARANDELAS PLANAS DE 1/2"
8
2
ARANDELAS DE PRESIÓN DE 1/2"
9
4
PERNOS CON CABEZA HEXAGONAL M10-1,25 X 30 MM
10
4
ARANDELAS PLANAS DE 10 MM
11
4
ARANDELAS DE PRESIÓN DE 10 MM
1
1
LA BULL BAR
2,3
2
SUPPORT, PASSAGER (2) ET CONDUCTEUR (3)
4
2
BOUCHON DE PLASTIQUE
5
4
PARE-CHOCS EN CAOUTCHOUC
6
2
BOULONS A TETE HEXAGONALE 1/2-13 X 2,00 PO
7
2
RONDELLES PLATES 1/2 PO
8
2
RONDELLES A FREIN 1/2 PO
9
4
BOULONS A TETE HEXAGONALE M10 1,25 X 30MM
10
4
RONDELLE PLATE 10 MM
11
4
RONDELLE A FREIN 10 MM
STEP 1.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions completely
before beginning.
STEP 2.
NOTE:
It may be necessary to remove/relocate front license plate and license plate bracket. It is not required, but
strongly recommended. If local/state laws requires a license plate, license plate relocation kit 32-0055 is
available.
STEP 3.
Determine passenger and driver brackets. Install brackets one side at a time.
optional tow hook, it must be removed.
STEP 4.
Remove bolts from outside of vehicle frame that attaches the bumper to the frame as shown.
STEP 5.
Attach brackets between frame and existing bumper bracket as shown. Leave loose.
STEP 6.
Attach Bull Bar to mount brackets using 1/2" fasteners. Level and adjust Bull Bar as desired and tighten all fasteners.
Recommended torque values are 64 Ft. Lbs. for 1/2" fasteners and 45 Ft. Lbs. for 10mm fasteners.
LIGHT INSTALLATION:
Insert threaded stud on base of the light through hole in cross tube. Using a ratchet, extension and
socket for correct size of nut supplied, insert through large clearance hole in bottom of cross tube. Thread nut and
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 2001-04 NISSAN FRONTIER
APLICACIÓN: NISSAN FRONTIER MOD. 2001-04
APPLICATION: NISSAN FRONTIER 2001-04
1
CONTENTS -
CONTENIDO
, ACOMPAÑANTE
(2)
Y CONDUCTOR
2002-04 NISSAN XTERRA
NISSAN XTERRA MOD. 2002-04
NISSAN XTERRA 2002-04
- CONTENU
(3)
WO:
2
TOOLS -
HERRAMIENTA
3/4" SOCKET
3/4" WRENCH
17MM SOCKET
16MM SOCKET
RATCHET
TORQUE WRENCH
DADO DE 3/4
"
LLAVE DE TUERCAS DE 3/4"
DADO DE 17MM
DADO DE 16MM
MANERAL
LLAVE DE TORQUE
DOUILLE DE 3/4 PO
CLE 3/4 PO
DOUILLE DE 17MM
DOUILLE DE 16MM
CLIQUET
Cl DE COUPLE
É
NOTE:
If vehicle is equipped with
269136
75-0434 REVISION A 4/8/08
3
- OUTILS
Publicidad
Manuales relacionados para Westin 33-1000
Resumen de contenidos para Westin 33-1000
- Página 1 APLICACIÓN: NISSAN FRONTIER MOD. 2001-04 NISSAN XTERRA MOD. 2002-04 APPLICATION: NISSAN FRONTIER 2001-04 NISSAN XTERRA 2002-04 AUTOMOTIVE PRODUCTS, INC. BULL BAR ASSEMBLY ENSAMBLE DE PARRILLA DELANTERA CON TIRÓN LA BULL BAR 33-1000 33-1005 33-1430 33-1435 ITEM CONTENTS - CONTENIDO - CONTENU TOOLS -...
- Página 2 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
- Página 3 PROTECTION DE LA FINISSION Les produits Westin ont une finission de haute qualité qui requiert des soins, comme toute autre finission du véhicule exposée aux éléments. Protégez la finission à l’aide d’une cire non- abrasive (par exemple, Pure Carnauba) de façon régulière. L’usage de tout savon, pâte à polir ou cire contenant un abrasif est nuisible, puisque les composantes strient la finission et la laissent vulnérable à...