Set Defaults; Host Type Selection; Keyboard Wedge Host Type - Symbol LS 7708 Guía De Referencia Rápida

138
LS 7708 Quick Reference Guide

Set Defaults

Scanning this bar code sets all parameters to their factory default values.
Set Defaults

Host Type Selection

If a Synapse cable (i.e., part number STIxx-xxxx) is used, the scanner
autodetects the type of host, so there is no need to scan host type selection
bar codes.
If a USB interface is used, the scanner autodetects the USB and defaults to the
HID keyboard interface. See page 149 to select the IBM Hand-Held host type.
Refer to the LS 7708 Product Reference Guide, p/n 72-69531-01, for additional
USB host types.
If a Keyboard Wedge, RS-232, Wand Emulation, or IBM 46XX host is used,
select that host type from the programming bar codes that follow. If Keyboard
Wedge is selected, also select a country keyboard type from the following
pages.

Keyboard Wedge Host Type

IBM PC/AT & IBM PC Compatibles