GRAPHITE 59G678 Manual Del Usuario página 12

Tabla de contenido

Publicidad

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
SPECIAL CONDITIONS REGARDING SAFETY OF ELECTRIC PLANER OPERATION
Before connecting the planer to mains socket make sure the supply voltage matches the voltage on the
rating plate of the tool.
Connect the planer only to electrical system equipped with residual current circuit breaker that will cut
the power off when earth leakage current exceeds 30 mA in less than 30 ms.
Use only sharp cutting parts.
After the work has been finished and before putting the planer away wait until rotating parts stop
completely.
Use hearing protection measures when working with planer.
When using the planer hold it firmly with both hands.
Power cord of the planer must be on the safe side, where there is no danger of accidental damage by
operating power tool.
Before starting operation ensure there are no metal objects, such as nails or screws, in the processed
material.
Do not put fingers into dust outlet hole. Clean the outlet with a piece of wood.
Fix processed material to prevent it from slipping.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of operational injuries.
CONSTRUCTION AND USE
Planer is a hand-held power tool with insulation class II. The tool is driven by single-phase commutator
motor. Planer is designed for processing wooden surfaces.
Range of use covers repair and building works, woodworking and any work from the scope of individual,
amateur activities (tinkering).
Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1.
Knob for planing depth adjustment
2.
Switch
3.
Switch lock button
4.
Drive belt cover
5.
Dust extraction outlet
6.
Front footplate
7.
Planing depth scale
8.
Parallel guide position locking wheel
9.
Parallel guide
10.
Support
11.
Support locking knob
12.
Deep planing guide
13.
Locking knob for deep planing guide
14.
Guide handle
15.
Fixing screws
ELECTRIC PLANER
59G678
DETAILED SAFETY REGULATIONS
12

Publicidad

Tabla de contenido
loading

Tabla de contenido