Internally Adjustable Forks With Ssv Rebound Adjustment - Marzocchi BOMBER Manual Del Operador

Adjustments
60
5.5 Internally adjustable forks
with SSV rebound adjustment
You will find some damping rods where the
rebound adjustment is located inside the
stanchion tube.
To adjust these forks, you will need to:
• remove the dust cap (A) located on the top of
the fork's leg.
• insert the supplied hexagon rod (B) into the
stanchion tube, making sure to center the
adjustment seat (C).
• When turning the adjuster clockwise, you will
increase the rebound hydraulic damping,
making the fork slower during the rebound
phase.
• When turning the adjuster counterclockwise,
you will decrease the rebound hydraulic
damping, making the fork more responsive
during the rebound phase.
Do not force the adjuster screw (C) past its
limits.
21 mm
A
B
C