AEG WS 9-100 Manual Original página 16

d) Use special care when working corners, sharp edges, etc.
Avoid bouncing and snagging the accessory.
e) Do not attach a saw chain, woodcarving blade or toothed
saw blade.
Safety Warnings Specific for Grinding and Abrasive Cutting-
Off Operations:
a) Use only wheel types that are recommended for your
power tool and the specific guard designed for the selected
wheel.
b) The guard must be securely attached to the power tool
and positioned for maximum safety, so the least amount
of wheel is exposed towards the operator.
c) Wheels must be used only for recommended applications.
For example: do not grind with the side of cut-off wheel.
d) Always use undamaged wheel flanges that are of correct
size and shape for your selected wheel.
e) Do not use worn down wheels from larger power tools.
Additional Safety Warnings Specific for Abrasive Cutting-Off
Operations:
a) Do not "jam" the cut-off wheel or apply excessive
pressure. Do not attempt to make an excessive depth of cut.
b) Do not position your body in line with and behind the
rotating wheel.
c) When wheel is binding or when interrupting a cut for any
reason, switch off the power tool and hold the power tool
motionless until the wheel comes to a complete stop. Never
attempt to remove the cut-off wheel from the cut while the
wheel is in motion otherwise kickback may occur.
d) Do not restart the cutting operation in the workpiece. Let
the wheel reach full speed and carefully reenter the cut.
e) Support panels or any oversized workpiece to minimize
the risk of wheel pinching and kickback.
f) Use extra caution when making a "pocket cut" into existing
walls or other blind areas.
Safety Warnings Specific for Sanding Operations:
a) Do not use excessively oversized sanding disc paper. Follow
manufacturers recommendations, when selecting sanding
paper.
Safety Warnings Specific for Wire Brushing Operations:
a) Be aware that wire bristles are thrown by the brush even
during ordinary operation. Do not overstress the wires by
applying excessive load to the brush.
b) If the use of a guard is recommended for wire brushing, do
not allow any interference of the wire wheel or brush with
the guard.
GB
English
15