Siefken km713 Instrucciones De Uso página 33

3 YEARS
L I M I T E D WA R R A N T Y
Polishing angle
d) Resume operation
NOTICE: The most common mistake when waxing / polishing a vehicle is applying too much
wax. If the foam pad is saturated with wax, wax application will be more di cult and take
longer. Applying too much wax can also shorten the life of the foam pad. If the foam pad is
continuously loosened from the pad holder during use, too much wax may have been applied.
10. After applying the wax to the vehicle's surface, release the trigger. Disconnect the power
cord from the electrical extension cord.
11. Remove the foam pad from the mount and with your hand and the foam pad, apply wax to
any area of the vehicle that is di cult to reach, such as around lights, door handles, under bum-
pers, etc.
12. Allow enough time for the wax to dry
13. Replace the foam pad (sold separately) and attach a clean polishing cloth (sold separately)
secure it to the foam pad
NOTICE: Use a rope to rmly grip the polishing cloth.
NOTICE: Start and stop the polisher / sander only while it is rmly held against the surface of the
vehicle. Otherwise, the foam pad cloth may come loose.
14. Turn on the polisher / sander and start polishing the dry wax.
15. When you have removed as much wax as you can with the polisher / sander, release the
trigger and unplug the polisher / sander
16. Remove the polishing cap from the foam pad. Using the polishing cloth, remove the wax
from all hard-to-reach areas of the vehicle.
11