Product Overview; Feature Description; Intended Use - Dräger X-plore 8000 Instrucciones De Uso

3 Description
3.1

Product overview

(see fold-out page Fig. A, B, C)
1 Visor shield
2 Outer visor frame
3 Inner visor frame
4 Helmet trim
5 Fixed visor frame
6 Sweatband
7 Mount
8 Helmet shell
9 Hard foam shell
10 Mounting clip
11 Hose connection
12 Rear part of headband with adjusting wheel
13 Fixed visor frame
14 Sweatband
15 Air outlet
16 Bump cap shell
17 Hard foam shell
18 Mounting clip
19 Headband
20 Comfortable padding
21 Fixed visor frame
3.2

Feature description

The facepieces of the Dräger X-plore 8000 series described
in these instructions for use include the following products:
– Dräger X-plore 8000 helmet with visor
– Dräger X-plore 8000 helmet/hood combination
– Dräger X-plore 8000 bump cap/hood combination
Instructions for use |
Dräger X-plore 8000 Facepieces
The facepieces consist of the following components:
Helmet shell with permanently
attached visor
Helmet shell with fixed visor frame
Bump cap shell with fixed visor frame
Helmet trim (chin trim or neck trim or
shoulder trim)
Hood
Earmuffs (optional)
The facepieces are connected to a breathing air supply via a
hose. The air from the breathing air supply is blown through
the air circulation system in front of the user's face. The
resulting overpressure prevents the penetration of ambient air
that may contain contaminants. Excess air can escape
through the sealing cuff of the facepiece.
3.3

Intended use

The facepieces of the Dräger X-plore 8000 series can only be
used with Dräger X-plore 8000 series powered air-purifying
respirators or Dräger X-plore 9300 series compressed air
hose units.
They protect the user from
– ambient air containing contaminants,
– solid and liquid particles,
– impacts.
Facepieces where the helmet trim or hood is made of
®
Tychem are suitable for use in the chemical industry and in
the oil and gas industry. These facepieces are intended for
limited use. They may only be used a second time if they are
not damaged. The use must also be acceptable from a
hygienic standpoint. Facepieces where the helmet trim or
®
hood is made of Tychem
Facepieces where the helmet trim is made of Zytec
suitable for use in welding or other work where the helmet trim
may be subjected to high mechanical strain.
Description
x
x
x
x
x x
cannot be cleaned.
®
| en
x
x
x
are also
13