Operating The Lawn Mower; Holding And Guiding The Lawn Mower; Setting The Cutting Height; Emptying The Grass Catcher Box - Stihl RMA 248 Manual De Instrucciones

12 Operating the Lawn Mower

12 Operating the Lawn Mower
12.1 Holding and Guiding the Lawn
Mower
► Hold the handlebar with both hands so the
thumbs enclose the handlebar.
12.2

Setting the Cutting Height

Seven cutting heights can be set:
– 25 mm = position 1
– 30 mm = position 2
– 40 mm = position 3
– 50 mm = position 4
– 55 mm = position 5
– 65 mm = position 6
– 75 mm = position 7
The positions are indicated on the lawn mower.
Setting the cutting height
► Stop the engine.
The blade must not be turning.
► Pull lever (1) from the notch and move to the
desired position.
0478-131-9861-B
12.3 Mowing
► Push the lawn mower forwards slowly and in a
controlled manner.
12.4 Emptying the Grass Catcher
Box
The flow of air generated by the blade raises
level indicator (1). The flow of air stops when the
grass catcher box is full. If the flow of air is too
low, level indicator (1) returns to its resting state.
This is a prompt to empty grass catcher box (2).
The functionality of level indicator (1) is restricted
if the flow of air is impaired. External influences
such as wet, dense or high grass, low cutting
height, dirt or the like can impair the flow of air
and the functionality of level indicator (1).
► If level indicator (1) drops to its resting state:
empty grass catcher box (2).
► Switch the lawn mower off.
► Detach grass catcher box (2).
English
33