Philips HEARTSTART TRAINING PADS II Manual De Instrucciones página 12

4
Not all scenarios are appropriate for all user training. Training scenario number
1 is the default scenario and is most commonly used when teaching how to use
the defibrillator to treat a victim of sudden cardiac arrest.
If the training scenarios are used as part of a formal training course, the
instructor may wish to:
• select only the scenarios appropriate for the training goals,
• create case histories and patient details for the selected scenarios,
• highlight certain features of the defibrillator's performance,
• assure that users conform to local protocols,
• check pad placement, and
• evaluate user knowledge on topics such as CPR and assessing the
patient.
USING THE HEARTSTART TRAINING PADS II
TO CONNECT THE TRAINING PADS
To use the training pads, remove the case from any packaging in which it is
provided or stored, then follow the steps below.
1. Be sure that the FRx defibrillator has a battery installed and a set of SMART
Pads II connected and that the green Ready light is blinking.
2. Unplug the SMART
Pads II connector from
the pads connector
port on the front of
the FRx Defibrillator
(A). Do not open the
pads case. Set it aside
for reconnection after
completion of training.
3. Plug the connector of
the Training Pads II
into the connector
port on the front of the FRx. Place the pads case in the pocket provided
inside the carry case (B).