TRAPP TR 600 Manual De Instrucciones página 59

Note:
According to Brazilian standard
✔
NBR 5410, the installation of a
device to protect against residual
differential current (RD device) in
the electrical installation of your
residence is compulsory. The
function of the "DR" is to protect
the user against serious electrical
shock risk (consult an electrician).
Additional Safety and Operation Instructions
Carefully read instructions and get
✔
familiar with the controls and proper
used of the equipment.
Remember that the operator or user is
✔
responsible for any accident or damage
involving people or their properties.
Do not operate the equipment
✔
barefooted or with sandals. Always wear
adequate shoes and pants, goggles,
gloves and ear plugs.
Avoid operating the equipment in humid
✔
places. Use the equipment in a well lit
environment.
Wear gloves to introduce residues
✔
material in the shredder. Use a long
piece of wood to push small pieces.
Before feeding any kind of foliage, start
✔
the motor and wait for it to reach
maximum revolution.
Do not introduce anything in the
✔
equipment with the motor off.
5 - Service.
Call a qualified professional to
✔
service the equipment. Use original
parts only.
Always call TRAPP Authorized
Service Technicians. TRAPP is not
responsible for occasional accidents
caused by the use of spare parts that
are not original.
Never operate the shredder with the
✔
cover open or without the belt
protection guard.
Do not use a water jet to clean
the equipment. Use a cloth
soaked in mild detergent. Water
inside the equipment can damage
the winding.
If the equipment starts to vibrate, turn it
✔
off immediately. Check the cause of
vibration as it indicates the equipment
needs adjustment or repair.
Make sure the voltage of the power
✔
source is the same of that of the
equipment.
Do not use the equipment during
✔
periods of power supply failure.
57
ENGLISH
Attention!