Air Filter; Useful Suggestions - TRAPP TR 600 Manual De Instrucciones

Air filter

Motor will not run properly with dirty air
filter. Frequently clean the filter, preferably
with compressed air. See motor manual.
Some problems may occur during the use of the shredder. Find some suggestions to solve
them below:
Problem Probable Cause
Shredder jamming Excessive intake/feeding.
Organic material accumulates
inside the machine.
Low production 1 - Insufficient feeding.
2 - Machine revolution below
3 - Humid product
Irregular cut 1 - Cutting blades need
2 - Worn counter cutting blade.

Useful Suggestions

specification.
sharpening.
79
To Clean Air Pre-filter
The pre-filter must be free from dirt to
avoid damage to the motor due to
overheating. Clean with compressed air or
wash in running water with mild soap.
Solution
Turn shredder off. Remove upper output device,
open cover, remove excess of material from inside
the machine. Close cover, replace output device,
turn shredder on, wait for motor to reach maximum
revolution and get back to work. Control machine
intake/feeding.
1 - Maintain continuous feeding, yet not over-
feeding which may cause shredder to jam.
2 - Check whether TDP rpm is below 540 rpm.
3 - Shred dry material only; humid products may
block output device.
1 - Sharpen cutting blades as indicated in
"Sharpen and Replace Blades".
2 - Do as item "Check Blades".
ENGLISH