- Put the lid (AF) on the bowl. Turn the lid in
1
the direction of the arrow until the peg of
the safety lock snaps home in the motor
unit (fig. 36). Make sure that the projection
36
of the lid covers the opening in the handle
of the bowl completely (fig. 37).
2
CLICK
How to use the juice extractor
- Switch the food processor on and select
the highest speed (position 5).
- Drop the fruit or vegetables into the juice
extractor through the chute (fig. 38).
CLICK
37
- Press the fruit or vegetables firmly down
with the pusher. Keep the pusher in the
chute as much as possible to prevent
spattering (fig. 39).
- Let the appliance run for another 20
seconds to obtain any juice still left in the
fruit.
- To avoid spilling juice on the appliance,
remove the bowl along with the juice
38
extractor accessories after use (fig. 40).
Tips:
• Before you use the juice extractor:
- cut carrots, white radishes, etc.;
- peel citrus fruits, pineapples, melons, etc.;
- stone cherries, plums, apricots, peaches
etc.
39
• Always switch on the appliance before you
put the fruit in the juice extractor.
• Switch off the appliance from time to time
to remove pulp from the pulp sieve and the
filter.
• Do not process large amounts of food at
the same time. Switch off the appliance if it
starts to vibrate strongly and clean the pulp
sieve and the filter before you switch it on
40
again.
41
1
42
2
10
®
Blender
(T - X)
Important:
• The appliance can be used with or
without the blender attached to the
motor unit. If you use the appliance
without the blender, the appliance
will not function if the screw cap (S)
has not been screwed onto the
attaching hole for the blender.
• Before use: do not put the mains plug
in the socket until you have attached
the blender jar (V), the lid (U) and the
knife unit (X) to the motor unit in the
correct way.
• After use: unplug the appliance
before you remove the blender jar
from the motor unit.
• The blender can be used for pureeing
very finely and for blending. It can be
used for e.g. soups, sauces,
milkshakes, baby food, vegetables,
fruit, thin batter, puree, etc. If
necessary, cut solid ingredients into
smaller pieces before you put them in
the blender.
• Do not fill the blender jar with
ingredients that are hotter than 80 °C.
• To prevent spilling, do not put more
than 1.5 litres of liquid in the blender
jar.
• Never remove the lid while the
blender is running.
Assembly and disassembly
- Put the rubber sealing ring (W) around the
edge of the knife unit (X) (fig. 41).
- Turn the knife unit to the left to attach it to
the blender jar (V) (fig. 42). Make sure it is
firmly fixed!