Sound - On/Off; Troubleshooting - Kohler K-527 Guia Del Usuario

Press and hold both icons
for 2 seconds.
+
Sound – ON/OFF
This setting turns the chime, associated with icon presses and the countdown for timed showering, ON or
OFF.
Factory default for this setting is chime ON (y).
Press and hold the [Power Icon] and the [Up Icon] to enter the settings menu. If your shower is on,
the water will be shut off.
Use the [Up Icon] or [Down Icon], to step to the "Prog 11" screen. Press the [Power Icon].
Use the [Up Icon] or [Down Icon] to choose "n" to disable chime, or "y" to enable. Press the [Power
Icon] to set.
Press the [Power Icon] again to return to the settings menu.
Continue Set-up: Use the [Up Icon] or [Down Icon], to choose the next desired setting; press the
[Power Icon] to select. See the section for the chosen setting.
To Exit the Settings Menu: Use the [Up Icon] or [Down Icon], to step to the "Prog En" screen and
press the [Power Icon]. The system will go into standby mode.

Troubleshooting

WARNING: Risk of electric shock. Disconnect power before performing any maintenance. When
disconnected, the product will no longer be electrically live, which will eliminate the risk of electric
shock.
CAUTION: Risk of personal injury. The valve may contain hot water; be careful when draining
any residual water.
NOTICE: Turn OFF the power and water supply to the valve before performing any maintenance to the
valve.
It is recommended that any valve maintenance should be performed by a Kohler Co. Authorized Service
Representative.
1144502-5-D
Enable (y) or disable (n)
chime.
18 Kohler Co.