Water Outlets - Enable Both Or Toggle (K-527 Only) - Kohler K-527 Guia Del Usuario

Press and hold both icons
for 2 seconds.
+
Water Outlets – Enable Both or Toggle (K-527 Only)
Factory default for this setting is dual-outlet operation (y).
Single-outlet operation (n):
• This setting allows for only one outlet to be on at a time. Both outlets can be used, but user can
only toggle between outlet 1 and outlet 2.
Dual-outlet operation (y):
• This setting allows for single- and dual-outlet operation. The user may have both outlets on at once
or toggle between the individual outlets.
Press and hold the [Power Icon] and the [Up Icon] to enter the settings menu. If your shower is on,
the water will be shut off.
Use the [Up Icon] or [Down Icon], to step to the "Prog 8" screen. Press the [Power Icon].
Use the [Up Icon] or [Down Icon] to choose "n" for single outlet operation, or "y" to allow both
outlets to be on at once. Press the [Power Icon] to set.
Press the [Power Icon] again to return to the settings menu.
Continue Set-up: Use the [Up Icon] or [Down Icon], to choose the next desired setting; press the
[Power Icon] to select. See the section for the chosen setting.
To Exit the Settings Menu: Use the [Up Icon] or [Down Icon], to step to the "Prog En" screen and
press the [Power Icon]. The system will go into standby mode.
Kohler Co.
Choose single-outlet operation (n)
or enable dual-outlet operation (y).
15 1144502-5-D