Technical Specifications - Carel MasterCella Hoja De Instrucciones

6. DIMENSIONS
200
Wall mounting
Panel installation

7. TECHNICAL SPECIFICATIONS

Power supply
Insulation guaranteed by
the power supply
Inputs
Probe type
Front board
5
6
4
Model Voltage
E 230 V~ (+10%, -15%), 50/60 Hz
A 115 V~ (+10%, -15%), 50/60 Hz
E, A insulation from very low voltage parts
insulation from relay outputs
S1 NTC or PTC, depending on the model
S2 NTC or PTC, depending on the model
D11 voltage-free contact, contact resistance < 10 Ω, closing current 6 mA NTC or PTC, depending on the
S3 model
D12 voltage-free contact, contact resistance < 10 Ω, closing current 6 mA NTC or PTC, depending on the
S4 model
D13 voltage-free contact, contact resistance < 10 Ω, closing current 6 mA NTC or PTC, depending on the
S5 model
Maximum distance from probes and digital inputs less than 10 m
Note: in the installation, keep the power supply and load connections separate from the probe, digital inputs,
repeater display and supervisor cables.
NTC std. CAREL
NTC high temperature
PTC std. CAREL
(specifi c model)
20
ø3.5 ø3.5
ø3.5 ø3.5
82
90
Fig. 6.1
10 kΩ a 25 °C, range from –50T90 °C
measurement error 1°C in the range from –50T50 °C
3°C in the range from +50T90 °C
50 kΩ a 25 °C, range from –40 T150 °C
measurement error 1,5 °C in the range from –20T115 °C
4 °C in the range outside of –40T150 °C
985 Ω a 25 °C, range from –50T150 °C
measurement error 2 °C in the range –50T50 °C
4°C in the range +50T150 °C
22
+050004105 rel. 0.0 del 27.07.05 - Preliminary version
Base board
85.4
7
ø3.5
ø3.5
7 38.4
Power
11.3 VA, 50 mA~ max.
11.3 VA, 100 mA~ max.
reinforced
6 mm in air, 8 mm on surface
3750 V basic insulation
primary
3 mm in air, 4 mm on surface
1250 V insulation