Descargar Imprimir esta página

Cleaning And Disinfection - Philips AVENT SCF330/40 Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13

Cleaning and disinfection

Caution: Wash your hands thoroughly before you touch disinfected items and make sure the
surfaces on which you place disinfected items are clean.
Clean and disinfect all parts of the breast pump before first use. Clean all parts after each use
and disinfect all parts before each subsequent use.
1 Disassemble the breast pump completely. Also remove the white valve.
Caution: Be careful when you remove the white valve and when you clean it. If it gets
damaged, your breast pump does not function properly. To remove the white valve, gently
pull at the ribbed tab on the side of the valve.
2 Clean all parts in hot water with some mild washing-up liquid and then rinse them
thoroughly. You can also clean the parts in the dishwasher (on the top rack only). Do not put
any other objects on top of them.
Note: To clean the valve, rub it gently between your fingers in warm water with some
washing-up liquid. Do not insert objects into the valve, as this may cause damage.
3 Disinfect all parts in a Philips Avent steam steriliser or by boiling them for 5 minutes. For
boiling, fill a household pot with enough water to cover all parts. Bring the water to the boil.
Place the parts in the household pot and boil them for 5 minutes. During disinfection with
boiling water, prevent the bottle or other parts from touching the side of the pan. This can
cause irreversible product deformation or damage that Philips cannot be held liable for. Allow
water to cool and gently remove the parts from the water. Place the parts neatly on a clean
paper towel or in a clean drying rack and allow them to air-dry. Avoid using cloth towels to
dry the parts because they can carry germs and bacteria that are harmful to your baby.
Note: Do not use abrasive or antibacterial cleaning agents.
Note: Excessive concentration of detergents may eventually cause plastic components to crack.
Should this occur, replace immediately.
Note: Food colorings may discolor parts.
Note: Philips Avent bottles are suitable for all methods of disinfection.
Storage
Keep the breast pump out of direct sunlight as prolonged exposure may cause discoloration.
Store the breast pump and its accessories in a safe and dry place.
Compatibility
The Philips Avent manual breast pump is compatible with Philips Avent bottles in our range.
The high-quality plastic Philips Avent Natural bottle is compatible with most Philips Avent
breast pumps, spouts, sealing discs and cup tops.
English
11

Publicidad

loading