Guarantee And Service - Philips HD9020 Manual De Instrucciones

EnglisH
16

guarantee and service

If you need service or information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your
country, go to your local Philips dealer.
troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the
information below, contact the Consumer Care Centre in your country.
problems and possible solutions
Water or
milk
Loaf rises, then falls Decrease 1-
2tbsp, use
colder liquid
Loaf rises too high Decrease 1-
2tbsp, use
colder liquid
Loaf does not rise Increase 1-
enough 2tbsp
Loaf is short and
heavy
Crust too light
Loaf is uncooked
Loaf is overcooked
Bread mixture is
unmixed
Smoke comes out
of vents
High altitude Decrease 1-
adjustment 2tbsp
Note: When you make corrections to amounts of ingredients, first change the amount of yeast. If the result is still not satisfactory, make adjustments to
liquids and then to dry ingredients.
Problem
The buttons do not work.
The appliance produces noise during
operation.
The appliance rattles during operation.
Some smoke comes out of the steam vents
and the appliance produces a burning smell.
The appliance does not start operating
when I press the start/stop/cancel button
and 'ERR' appears on the display.
Salt Sugar or
honey
Increase
¼tsp
Increase Decrease
1/4tsp ½tsp
Decrease Increase
1/4tsp ½tsp
Increase
½tsp
Decrease
½tsp
Decrease
½tsp
Possible cause
The plug is not in the wall socket.
The motor produces noise during the
kneading process. This is normal.
The bread pan is not installed properly.
Ingredients or bread crumbs have
collected on the heating element or
inside the appliance.
The appliance is overheated.
Flour Yeast
Increase 1-2tbsp, Decrease 1/8-¼tsp, use
use fresher flour, fresh yeast, use right type of
use right type of yeast at right setting
flour
Decrease 1-2tbsp Decrease 1/8-¼tsp, use right
type of yeast at right setting
Use fresher flour, Increase 1/8-¼tsp, use fresh
use right type of yeast, use right type of yeast
flour at right setting
Use fresher flour, Add yeast, use fresh yeast,
use right type of use right type of yeast at
flour right setting
Decrease 1/8-¼tsp
Solution
Put the plug in the wall socket.If the problem persists,
contact the Consumer Care Centre in your country.
No action required.
To install the bread pan properly, turn it clockwise
until it locks into position.
Always clean the appliance after use. Unplug the
appliance and let it cool down before you clean it.
Let the appliance cool down for approx. 1 hour.
Other
Check power
supply
Check power
supply
Select correct
settings
Check power
supply, select
correct settings
Select correct
settings
Place bread pan
properly,
push kneading
blade correctly
onto shaft in bread
pan
Clean heating
element