Chicco Video Digital Plus Manual Del Usuario página 18

9. Volume adjustment buttons (9° and 9b) (VOL+ /
VOL - : total 10 levels from min to max)
10. Colour video-camera lens
11. Infrared ray illumination system (6 LEDs) so par-
ents can monitor the child in the dark.
12. Photosensitive sensor
13. Battery compartment cover
14. Child unit external power socket
(9V , 600mA ).
15. Slot to install the child unit on the wall
1.3 Parent unit (with image and sound receiver
function) with special holder base.
Model 06654
1. Powered by switching adaptor 100-240V ~ ,
50/60Hz / 9V
ent unit (with image and sound receiver function) in
the relative slot (16) on the special holder base (10)
or by rechargeable battery pack (14) NiMh,,4x1.2V,
1500 mAh, AA type (included).
Recharging of the rechargeable battery pack with
the switching mains adaptor 100-240V ~, 50/60Hz
/ 9V , 600mA by inserting the parent unit
(with image and sound receiver function) into the
slot (16) on the special holder base (10).
2. ON/Off button
3. Volume adjustment buttons ( +
10 levels from min to max)
4. Luminous LED indicator (4 orange LED) for noise/
sound levels received from the child unit.
5. Power indicator 3-coloured LED – green/red/or-
ange – parent unit: (a) Green: unit ON and ready for
normal use (b) red: rechargeable battery pack (14)
is low (c) orange: rechargeable battery pack (14)
charge status of the parent unit.
6. Integrated speaker to reproduce the sound/noise
from the child's room.
It also has the additional functions seen below:
a) Warning signal when contact is lost between the
child unit and the parent unit: it will continue to
beep twice every second after 15 seconds if there
is no connection when the unit is switched on, or
if the connection is lost. As soon as connection is
re-established, the alarm beep is silenced;
b) Rechargeable battery pack (14) low battery indi-
cator function: the alarm function beeps once every
second. Recharge the rechargeable battery pack.
The alarm beep switches off as soon as the battery
pack (14) recharge commences.
a) Alarm/reminder signal function: the alarm func-
tion beeps once when the date and time set for the
alarm in the main menu expires .
7. Voice activation mode ON/OFF button
The default setting when the unit is fi rst switched
on is OFF. The selected operating mode, using the
relative button, remains enabled when the unit is
switched off and on.
8. Backlit 2.4 inch LCD display.
The BACKLIT LCD display allows users to watch live
images of the child and view the following icons:
- rechargeable battery pack (14) charge status icon
on the parent unit;
- transmission signal status
- volume adjustment level;
- voice activation mode status
- current date and time
- zoom function status
- alarm/reminder status
For further information on the icons displayed,
please refer to paragraph "2.2.4 Backlit LCD
, 600mA by placing the par-
- : total
Display" of this manual.
9.Multi-function button.
The multi-function button allows users to manage
the following functions on the main menu:
- current date and time settings;
- alarm/reminder settings and activation ;
- brightness adjustment on the backlit LCD display
(8)
- zoom function settings (1x, 2x)
10. Special holder base for the parent unit (with im-
age and sound receiver function) used to recharge
the rechargeable battery pack (14).
11. Rechargeable battery pack compartment cover
12. Belt clip
13. Socket for mains power
charge the rechargeable battery pack (9V
600mA) (14) on the special holder base (10).
14. Rechargeable battery pack
15. Rechargeable battery pack charge contacts (14)
16. Parent unit (with image and sound receiver
function) slot to recharge the rechargeable battery
pack (14) on the special holder base (10).
2. Description of the characteristics
2.1 Child Unit (with image and sound transmit-
ter function)
2.1.1 Power:
Powered by switching mains adaptors 100-240V ~
50/60Hz / 9V
AA type batteries (not included).
If powered by a mains adaptor (1):
insert the adaptor plug (1) into the socket (14) on
the side of the unit, check that the voltage used by
the electrical system corresponds to that indicated
on the mains adaptor (1) plate indicated above.
plug the mains adaptor (1) into the mains socket
Warning:
- The mains adaptor (1) cable can strangle children
and must be kept out of their reach at all times
- Inspect the mains adaptors (1) periodically; if the
power cable or the plastic parts are damaged, do
not use them and contact a qualifi ed expert.
- Never leave the adaptors (1) connected to the
mains when the devices are not in use and/or not
connected to the adaptors (1) themselves.
2.1.2 Instructions for use – Switching on and
Sound Adjustments
The child unit (with image and sound transmitter
function) should be placed about 1 – 1.5 metres
from the child, on a fl at and stable surface or fi xed
to wall using the relative slot (15), making sure the
microphone (6) is facing the child.
WARNING!
- Install the child unit in a secure place, where the
child unit, the mains adaptor (1) and the power
cable ARE SAFELY OUT OF CHILDREN'S REACH.
WARNING: danger of strangulation for the child
and injury if the child unit falls off the wall.
• If you decide to fi x the child unit to the wall using
the slot (15), make sure the screw is fi xed securely
to the wall using a plastic dowel.
- It is recommended to position the child unit so
18
and to re-
, 600mA or 4 alkaline 1.5 V
,