Chicco Video Digital Plus Manual Del Usuario página 24

3.3 Replacing the rechargeable battery pack
inside the parent unit (with image and sound
receiver function) .
Remove the rechargeable battery pack compart-
ment cover (11) behind the parent unit. Remove the
rechargeable battery pack (14), if dead, by gently
removing the connector plug from the parent unit
and replace it with a rechargeable battery pack
identical (14) to that supplied with the product i.e.
NiMh 4.8V 1500 mAh (4x1.2V AA type), making
sure the connection plug is connected in the right
direction. Press the rechargeable battery pack com-
partment cover (11) back into place.
HOW TO CHECK THE RECEPTION SIGNAL
Place the parent unit (with image and sound receiv-
er function) suffi ciently far away from the child unit
(with image and sound transmitter function), so
that it does not whistle (Larsen effect). One adult
should try speaking into the child unit, changing the
voice volume, while the other adult should check
the parent unit (with image and sound receiver
function) to make sure it receives the sound and
image correctly.
Always check that both units are working wherever
they are placed.
TO IMPROVE PERFORMANCE
- Place the child unit (with image and sound trans-
mitter function) 1-2 metres away from the baby.
- To prevent annoying whistling (Larson effect)
place the parent unit (with image and sound receiv-
er function) suffi ciently far away from the child unit
(with image and sound transmitter function).
• Check reception regularly following the instruc-
tions illustrated above.
• Adjust the volume to the desired level.
• If the sound or image quality deteriorates on the
parent unit during use, it may have reached the
maximum reception range. If this is the case, sim-
ply place the parent unit a little closer to the child
unit.
• Darken the room where the child unit (with image
and sound transmission function) unit is placed to
check that the photo-sensitive sensor (12), which
automatically enables night viewing, is working
properly.
24