Assembly Procedure - Skoda 5E0 054 630 Manual De Instrucciones

Idiomas disponibles

Rear parking assistant

The accessories are intended for professional fitting. ŠKODA AUTO recommends having the

assembly done by its contractors.

Rear parking assistant, Order Number 5E0 054 630, is intended for vehicles ŠKODA Octa-

via (5E5) and ŠKODA Octavia Combi (5E9). It serves to facilitate parking the car in reverse.

The four sensors in the rear bumper watch the distance between the vehicle and a possible

obstacle. The driver is informed on the extent of the free area by the acoustic signal from the

loudspeaker.

If an obstacle appears at a distance of 140 cm from the rear section of the vehicle, it

is signalled with short beeps at an interval of 1 second. Approaching the obstacle, this

interval gets shorter continuously. At a distance of 30 cm, the beeping changes into an

uninterrupted tone (signal STOP). Moreover, it is accompanied with jump changes of the

pitch, see individual zones, fig. 20.

The parking assistant is not connected to data lines, and therefore its diagnostics by the

instrument VAS is not possible.

Important instructions for fitting

Advice. The vehicle must be clean; preferably washed in a car-wash.

Before gluing the park sensor holders, the control unit and foam adhesive tapes, clean and

degrease all the chosen places carefully using a suitable degreaser. Let them dry for

10 minutes. Once the places have been prepared in this way, do not touch them more for any

reason; otherwise it is not possible to guarantee the perfect affixing of individual parts!

Caution. During the fitting, ensure ventilation of the workplace

- cleaning agents contain dangerous vapours.

Assembly procedure

Have the accumulator disconnected during the fitting (when a coded car radio is in the car,

find out its code first).

Advice. Fitting the rear parking assistant and wiring the conductors in

the rear combined lamp terminal board is the same for vehicles ŠKODA

Octavia and ŠKODA Octavia Combi. Only the location of the control

unit and speaker in the trunk of the car differs!

Vehicles ŠKODA Octavia - Fig. 14 - 18,

vehicles ŠKODA Octavia Combi - Fig. 19.

Perform the disassembly and reassembly of individual parts according to the ŠKODA work-

shop manual.