Publicidad
STEP 8
Turn drawer box upside down.
Place Blum triggers against the
front and side walls of drawer box
NOTE: The orange cover of trigger
faces the inside of the frame.
Triggers are marked left and right.
Attach triggers to drawer box using
(4) #6 x 1/2" pan head screws (See
Figure H).
#2
#2
#2
STEP 9
Place the drawer box onto the
slide assembly and push back until
the unit locks to slides (See Figure I).
NOTE: You will hear a "click"
when it locks.
STEP 10
Pull out drawer box and cycle a
few times to check function of
slides and check to make sure the
door will not hit the drawer box
when closed.
STEP 11
Press divider clips into holes on
the drawer box in the desired
locations then slide the dividers
onto the clips (See Figure J).
4
FIG. H
FIG. I
Customer Service: 800-626-1126 | rev-a-shelf.com
FIG. J
Divider
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
Clip
I-486VSM-1217
Publicidad
