cosori CP016-PC Manual De Instrucciones página 15

Pasta/Boil
The default temperature is 212°F (100°C) and
cannot be changed.
1. Place the inner pot into the housing,
then pour the desired amount of liquid
into the inner pot.
2. Press Pasta/Boil.
3. ( Optional ) Press Adjust to change the
power level.
NOTE: The pressure cooker will always heat
up liquids using High Power, and will maintain
boiling temperature using the setting that you have
chosen.
Program
Pasta/Boil Normal/Medium
Yogurt
i.
Heating the Milk
1. Place the inner pot into the
housing, and pour the desired
amount of milk into the inner pot.
Press Yogurt.
2.
Use the Adjust button to select
3.
"More/High". The display will
show " " to indicate that the
pressure cooker is ready to heat up
the milk.
Press On/Start. The pressure
4.
cooker will start heating up, and the
display will show "
the pressure cooker is finished
heating, the display will show
"00:10".
Adjust Setting
Less/Low
More/High
". When
4. ( Optional ) Set up your cooking time
using Cook Time and the + or –
buttons (the default cooking time is 30
minutes).
Press On/Start. The pressure cooker
5.
will beep 5 times once it reaches
boiling temperature.
6. The pressure cooker will alert you with
3 beeps when cooking has finished.
Carefully take your ingredients out of
the pot.
Default Time Default Power Mode
30 minutes
5. The pressure cooker will beep
when the process is complete and
will go into standby mode. Allow
the pressure to naturally release
before opening the lid.
6. Allow the milk to cool. Use
a thermometer to check the
temperature of the milk as it
cools. The milk is ready when the
temperature is below 115°F (46°C).
EN
Low
Medium
High
15