EN
CARE & MAINTENANCE
1.
Unplug the pressure cooker and allow
it to completely cool before cleaning.
2.
Remove the water collection cup and
rinse it out with clean water. Wipe it dry
with a clean cloth, then place it back
onto the side of the pressure cooker.
3.
Remove the lid from the housing. Take
the sealing ring out by gently pulling it
while holding the lid down.
4.
The inner pot, sealing ring, and
steamer rack are easy to clean and
dishwasher safe. The rice spoon, ladle,
and rice cup can be washed on the top
rack of the dishwasher.
5.
Wash the lid in warm soapy water.
Make sure to remove any food debris
from the sealing ring rack and anti-
clog filter.
6.
If necessary, the parts inside the lid can
be removed for cleaning. These parts
are small and easy to lose, so be careful.
a. Remove the anti-clog filter by
gripping it from either side,
then pulling it up.
Rinse and dry the anti-clog filter
and replace it inside the lid.
b. Remove the float valve sealing
ring, and the float valve from
the lid.
parts with clean water, and
secure the float valve back onto
the lid using the float valve
sealing ring.
7.
Wipe the inside and outside of the
base with a clean, damp cloth. Do not
immerse the base in water or spray
water inside the housing.
18
[Figure
5.1]
[Figure
5.2] Rinse both
[Figure
5.3]
Inside of lid
Figure 5.1
Inside of lid
Figure 5.2
Figure 5.3