Descargar Imprimir esta página

U-Shaped Bracket - Cequent Performance Products 30095 Instrucciones De Instalación

Publicidad

Idiomas disponibles

Idiomas disponibles

*** NOTE:
2009-CURRENT DODGE 1500 LONG BED & SHORT BED – REQUIRES ADAPTER KIT 58433
Read pages 1-3 of these instructions before starting installation. Failure to do so could result in significant vehicle damage!
Front of Vehicle
Fifth wheel hitches over 18k
must have a center bolt in the
center hole in both rails.
Note: Place center bolt in the
hole that does not interfere with
the bed sill. If needed, flip the
rail around.
Center bolts and hardware are
supplied with Fifth wheel or
gooseneck hitches that are rated
over 18k.
KING PIN CENTERED
APPROX OVER AXLE
U- Shaped Bracket.
Placed around bed
sill.
Front of
Vehicle
Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake lines, structural members, etc.
Cequent Performance Products, Inc. does its best to communicate tow vehicle manufacturer changes; however, it is ultimately
30095N 6/13/14 REV. K
SEE 58433 INSTRUCTION FOR INSTALLATION
02-08 DODGE 1500
2003 – 2013 DODGE 2500 – 3500
CENTER
See the following page for more detailed information.
Note: Pull wire provided, will be needed to install
hardware in brackets through frame.
the responsibility of the installer to prevent damage due to installation.
©2014 Cequent Performance Products, Inc.
LONG BED & SHORT BED
CAUTION!
Bed sill
CAUTION!
Rear Edge of
Truck Bed
27 7/8" Long Bed
25 7/8" Short Bed
Measure from Rear Edge of
truck bed to rear edge of base
rail.
th
5
Wheel Leg
Angled bracket
(Inside of Frame)
1/4
PRINTED IN CHINA
2
9

Publicidad

loading