Connection To Electric System; Cut-Out Switch (Only The United States) - Interpump Group QUIKY TURBO 11.50 Instrucciones Para El Uso

5.3 - CONNECTION TO ELECTRICAL SYSTEM
1 - Check that the voltage of the electrical system (mains) is the same as indicated on the ID
label of the machine.
2 - Check that the plug complies with local safety r
ground connection (earth).
3 - Ensure that the outlet is pr otected by a "cut-out" (differential magnetic-thermal switch with
sensitivity of less than 30mA per 30ms) or that a device is pr esent which can test the earthing
circuit.
4 - Do not connect other appliances to the same power outlet while using the machine.
5 - Insert the plug only after checking that the machine switch is in the OFF position.
6 - The standard plug for 50 Hz versions: SCHUKO 250V - 16A, standar d CEE7-VII
DIN49441-2-AR2.
7- Fully unwind the power cor d to prevent overheating.
8 - Do not crush on the power cor d.
9 - Do not use the high pr essure cleaner if the electric cable is damaged.
10 - If the power cor d is damaged, its r eplacement can be ef fected only by the technical ser-
vice personnel or by a qualified technician.
WARNING: IN CASE OF POWER F
UNIT FOR SAFETY REASONS.

5.3.1 - CUT-OUT SWITCH (Only the United States)

This UL version high-pressure washer is equipped with a cut-out switch contained in the power
cable plug.
Said equipment provides extra protection against the risk of electric shock.
When replacing the plug or cable, use the same components including the cut-out device.
egulations, and that it is pr ovided with
AILURE DURING OPERA TION TURN OFF THE
10