The unit can suck and mix detergents and other liquid chemicals thanks
to an automatic device incorporated in the unit itself, which is r emote
controlled by operating the ROTOTEK.
- The unit is equipped with a chemical suction kit (Fig. A).
- Fit the brass connector into the chemical contr ol knob and filter into chemical container
(Fig.B).
- Select low pressure with the ROTOTEK (Fig. C).
- At this point the suction and mixing of the chemical will start automatically .
- You can regulate the quantity of chemicals by adjusting the chemical contr ol knob (Fig. D).
- When you wish to stop using chemicals in or der to clean on rinse, simply r elease the gun
trigger and adjust the ROTOTEK to high pr essure.
At this point the chemical injection automatically stops.
If you foresee not using the unit for a long period of time, we suggest to clean the chemical
suction kit with clear water to avoid chemical deposit build-up.
Attention! In the event of direct contact with detergent additives, follow instructions provided
by the manufacturer and/or product retailer and rinse the affected body part with clean water.
Pressure selection must be carried out with closed gun (1)
A - selection of the pr essure
• High pressure (2)
• Low pressure (3)
A
1
7 - HOW TO USE CHEMICAL PRODUCTS
8 - USE OF ROTOTEK OR MULTIREG 99
L
H
L
H
B - selection of the jet
• straight pin jet (4)
• fan jet (5)
2
B
3
15
4
L
H
5
L
H