Parameter Set-Up; To Choose The Auto. Off Time - Giropes Baxtran BAP Manual Del Usuario

5. Press
temperature will be the same as the last one. But if exiting from this mode, the water
temperature will be the default one when entering into the mode for the next time
6. Water's density in different temperature
5. PARAMETERS SET-UP
The parameter set-up menus allow the balance to be set as required by the user.
Press the and
mode.

5.1 TO CHOOSE THE AUTO. OFF TIME

The display show as below:
A. off
Press or key to move to last setting or next setting; or press
Press the or
Then press the key to confirm and move to next setting or press the
key in step "e" to do the density calculation for next object, the water
key at the same time, and hold for 2 seconds, then the display will enter into parameter setting
key to choose the Auto. off time from 2m, 5m, 8m or no (Disabled to auto. off). (Default: no)
USER MANUAL BAR
key to enter into current setting.
key to move to next setting.
EN EN
11