Feature Description; Explanation Of Type-Identifying Marking And Symbols; Intended Use - Dräger X-plore 8000 Manual Del Usuario

3.2

Feature description

® 1)
The Dräger X-plore 8000 The hood serves as a facepiece for respiratory
protective devices. It makes the breathing air available that is fed through the
respiratory protective device.
The breathing air is supplied through a breathing hose on the back of the hood.
The breathing air flows over the back of the user's head to the front. The
resulting overpressure prevents polluted ambient air from penetrating.
3.3

Intended use

The hoods are designed as facepieces for use with the Dräger X-plore® 8000
powered air purifying respirator and the Dräger® X-plore 9300 air line breathing
apparatus.
3.4 Limitations on use
The protective effect can be impaired by the following factors:
– High wind velocities and strong crosswind
– Earpieces or beards under the face cuff
3.5 Approvals
The hoods conform to the EU regulations on personal protective equipment
(EU) 2016/425. For information on the corresponding system approvals please
refer to the instructions for use of the respirators mentioned in 3.3 Intended use.
The hoods themselves are approved according to EN 166:2001.
®
In the USA the Dräger X-plore 8000 hoods is approved in combination with the
®
Dräger X-plore 8000 device in accordance with Part 84, Title 42 of the Code of
Federal Regulations. It is only permitted to be used together with components
that have NIOSH approval (see Approval Label of the Dräger X-plore
blower unit).
®
1) X-plore is a registered trademark of Dräger.
Instructions for use |
Dräger X-plore
®
8000
®
8000 Hoods
3.6 Explanation of type-identifying marking and
symbols
3.6.1 Tag
The illustrated tag serves as an example. The specifications may vary
depending on the hood.
X-plore 8000
Standard Short Hood
6
Part-No. : R59800
7
Serial-No. :
Size : S/M
8
1 Approval marking
2 CE marking
3 "Follow instructions for use" symbol
4 Manufacturer
5 Country of production
6 Part number (example)
7 Serial number
8 Size
Explanation of the codes in the approval marking:
1 Optical class
Description
1
EN 12941
1 F 3 - EN 166
3
Dräger Safety AG & Co. KGaA
4
23560 Lübeck, Germany
5
Made in China
| en
2
11