Operating Instructions - Renault FALCON 4152 Instrucciones De Uso

USER'S MANUAL
1. General Description
Your car is fitted with an original protection system against intrusion attempts. It is controlled via a remote control/
badge/hands-free badge.
Once the car locked, the alarm system protects it against hood, door or trunk opening (perimeter protection),
intrusion into passenger compartment (volumetric protection), towing (depending on your alarm system
configuration an optional anti-lift sensor may be necessary) and battery cut-off.
The alarm triggers whenever any of the aforementioned events occurs. The buzzer sounds for 28 seconds,
followed by a 5 seconds pause, while car indicator lights flash for as long as the alarm sounds. If such event reoccurs,
the alarm will sound 10 times at the most for the same trigger.
The buzzer may be turned off at any time if an unlocking command is launched or ignition is turned on with the
original car key.
2. System Arming
a. Regular Arming
When you lock your car, the alarm system is armed and indicator lights flash twice. All protection system sensors are
activated after 25 seconds. Windows and sunroof must be closed in order to avoid nuisance alarms.
The security system will not be armed after a locking command is given if any door or the trunk is open if the
ignition is ON, a badge is inserted into the reader or the hands-free badge is inside the passenger compartment.
b. Arming without volumetric protection
When volumetric protection must be disengaged (you want windows and/or sunroof to be open, to leave your pet in
the car, the storms begins or you wash your car, etc), you can achieve this by switching ignition ON twice followed by
locking the vehicle within no more than 50 seconds. The buzzer signals with 3 short beeps that the system is armed
without volumetric protection. If the alarm system is fitted with an anti-lift sensor and a command is launched for
system arming without volumetric protection, this sensor WILL NOT BE TURNED OFF.
1
NOTE: According to the type of vehicle, the volumetric protection may be shut off by a LONG press of the locking key on the
original remote control.
1.3
c. Arming with anti-lift sensor exclusion
The alarm may be armed without the extra protection secured by the anti-lift sensor. This mode may be activated by
switching the ignition ON three times followed by car locking within no more than 50 seconds. The buzzer will signal
system arming without anti-lift sensor activation by 4 short beeps.
NOTE: For some vehicles it is possible to do arming with anti-lift sensor exclusion by quickly pressing 3 times on
LOCK button of original car transmitter, in less than 3 seconds.
4152UG-4
1.1 1.2
2/36
p2/36
2.3
p3/36
2
d. Arming with exclusion of both volumetric protection and anti-lift sensor
The alarm system may be armed with volumetric protection only. This mode may be activated by switching the
ignition ON four times followed by car locking within no more than 50 seconds. System arming without volumetric
protection and anti-lift sensor will be signalled by 5 short beeps.
NOTE: For some vehicles it is possible to do arming without volumetric protection and anti-lift sensor by quickly
pressing 4 times on LOCK button of original car transmitter, in less than 3 seconds.
3
NOTE: arming without volumetric protection and/or anti-lift sensor remains active until the system is disarmed.
3. Security system disarming
The security system is disarmed and indicator lights flash once if the car is unlocked using the original car key. If the
alarm was triggered, 4 short beeps will be heard on system disarming ,to warn the user of a trigger event.
4. Emergency disarm feature
When the remote control/badge/hands-free badge does not work (exhausted battery, area exposed to high-pitch
noise), the system may be urgently disarmed as follows: unlock the vehicle with the key; open the door (the buzzer
will sound); turn the ignition ON (with the key or by inserting the badge into the reader and pushing the button). The
alarm stops signalling and the buzzer sends out 4 short beeps.
5. Arming diagnostics
The security system has user bypass notification functions::
n When the hood is open on locking, the system sends out 3 long sounds. Close the hood and the protection
system will automatically switch engine hood monitoring on. Therefore, any subsequent attempt to open the hood
will activate the security system.
n For vehicles without LIN BUS connection only: Once armed, the system controls the communications with the
sensors module. If no such communication is possible, the system sends out 2 long beeps. If this happen, contact
service unit.
Example: If the hood of your car is open at the time the command for arming without volumetric protection is
launched, the security system warns the user through 3 short beeps (arming without volumetric protection)
followed, after a 3 seconds pause, by 3 long beeps to draw the attention on the open hood.
21/01/2020
2.1 2.2
3/36
3.1
4/36 5/36
10/36
3.3
p5/36
3.2