Main Unit Parts And Functions - Esoteric N-05XD Manual Del Usuario

Main unit parts and functions

A
STANDBY/ON button
Press this to turn the unit on or put it into standby mode .
When the unit is on, the ring around the button lights .
When the unit is off, it is unlit .
When not using the unit, put it into standby mode .
B
PHONES jacks
Connect headphones plugs (standard 6 .3mm (1/4") stereo or
4-pin XLR) here (page 14) .
C
CLOCK indicator
This shows the clock synchronization status .
This indicator blinks during clock synchronization and lights
when synchronization completes .
This lights green when the input source is USB or NET and the
unit is operating using the internal clock .
D
Remote control signal receiver
This receives signals from the remote control . When using the
remote control, point the end of it toward this receiver panel .
E
OUTPUT button
Press this to switch which connector outputs analog audio .
PHONES jacks
Phones (BAL)
(balanced)
Analog audio output
(LINE OUT) connectors*
*Connectors set using the analog audio output setting (LOUT>) .
F
INPUT button
Press this to select the input source . If no digital signal is input
when the input source is digital, the input source name will blink .
18
Phones (UNBAL)
(unbalanced)
G
MENU button
Press this to enter setting mode .
H
Setting adjustment (l/;) buttons
Use these to change parameters when in setting mode .
These can be used for playback and song selection when the
input source is NET or Bluetooth .
o Use these also for operations when pairing with another
Bluetooth device (page 21) .
o When the input source is NET or Bluetooth, press the ; but-
ton once to start playback and again to skip to the next track .
During playback, press the l button to skip to the previous
track and press and hold it to stop .
I
Display
This shows various information, including the volume and the
sampling frequency of the input source .
J
USB drive port ( )
Connect USB flash drives that contain audio files, for example,
here .
o This port can only be used to play audio files contained on
the connected USB flash drive or other device .
o To play audio files on a USB flash drive or other device con-
nected to the USB drive port, set the input source to NET and
use an app for playback (page 14) .
K
VOLUME knob
Use this to adjust the volume .
Turn this knob clockwise to increase the volume and counter-
clockwise to decrease it .