Playing audio files
1
Connect this unit to the computer using a USB
cable.
Use a commercially-available USB cable with a connector that
matches that of this unit .
2
Turn the computer on.
Confirm that the operating system has started properly .
3
Press the STANDBY/ON button to turn the unit
on.
4
Press the INPUT button repeatedly to select
USB.
5
Start playback of an audio file on the computer.
For better audio quality, set the computer volume to its maxi-
mum and adjust the volume of the amplifier connected to this
unit . Set the amplifier volume to the minimum when you start
playback and gradually increase it .
Adjust the volume on this unit when using connected head-
phones or power amplifiers .
o The computer cannot be used to control this unit, nor can this
unit be used to control the computer .
o This unit cannot transmit audio files to the computer by USB .
o Do not do any of the following when playing back audio files
over the USB connection . Doing so could cause the computer to
malfunction . Always quit the audio playback software before con-
ducting any of these operations .
o Unplug the USB cable
o Put the unit into standby
o Change the input
o Computer operation sounds will also be transmitted when play-
ing back audio files over the USB connection . To avoid outputting
these sounds, make the necessary settings on your computer .
o If you start the audio playback software before connecting this
unit with the computer or before setting the input to USB, audio
files might not play back properly . If this occurs, restart the audio
playback software or restart the computer .
23