Care And Cleaning - AVS Bugflector Instrucciones De Instalación

Installation Steps
Check position of hood shield. NOTE: Ensure that center flanges where tape will adhere are not in contact with top of grille.
10
NOTE: On 2010-14 Subaru Outback only, use taping method
indicated below.
Hood shield
Grille
11
Remove remaining tape liner by pulling on the free ends. Apply
pressure to flange to ensure proper adhesion of tape.
13

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade™, the Auto Ventshade™ logo and the AVS™ logo are trademarks of Lund, Inc.
™
NOTE: Actual application may vary slightly from illustrations.
Lund International
800-241-7219 • Visit us at lundinternational.com
© 2020 Lund, Inc. All rights reserved.
Align front of shield with front edge of hood.
Press and hold hood shield against the upper surface of hood.
Hood
12
Remove adhesive backing and apply (2) bump
14
Page 3 of 3
Hood shield
Grille
ons to hood surface.
The material that your product is made from can
be recycled. Please also consider recycling the
packaging that your product came in.
Hood