Operation - Everbilt CSP010 Guía De Uso Y De Mantenimiento

Operation

NOTE: This unit is non-submersible. The pump should not be installed in a manner that will subject it to flooding, splashing or spraying.
1
Mounting the pump
The tank has two slots (1) provided to mount the unit. The slots

are located on the back of the tank. Mount the unit either on the
side of the air conditioner unit or nearby wall.
The pump must be level and the inlet must be below the coil

drain. Conduit fittings are not compatible with the plastic pump
housing.
3
Connecting the tubing
Connect the tubing from the pump discharge hose barb to the

floor drain, laundry tub, or sink. Leave an air gap above the tub
drain.
2
Connecting the air conditioning
condensate drain tubing
Ensure the tubing to the pump intake is fastened securely so that

it cannot come out of the pump intake port.
Cut the tubing at an angle so that the bottom of the reservoir

does not close the tubing outlet. Be sure the tubing does not
interfere with the float.
4
Plugging in the pump
Plug the pump power cord into a 115 volt properly grounded

power outlet.
5
Please contact 1-844-241-5521 for further assistance.
HOMEDEPOT.COM