EN
6.1 - DESCRIPTION OF THE
CONTROLS
6.1.a - Left-side handlebar controls
(Fig. 13)
1) Brake lever
Pull this lever (1) to activate the brake on
the frontal wheel.
2) Parking brake
In order to engage the parking brake, pull
the lever (1) to the end of its stroke and
engage the locking device (2). This locks
the lever (1) in place.
In order to release the brake, pull the le-
ver (1) and press the locking device (2)
outwards. This will release the lever (1).
3) Movement direction selector
NOTE:
The movement direction selector is only
enabled while the operator is seated in the
driver's seat.
The selector is made up of two buttons:
-
Press button (3a) to enable "FORWARD"
movement, "↑" appears on the display.
Press button (3b) to enable "REVERSE"
movement, "↓" appears on the display.
-
Press both buttons simultaneously to dis-
able the selected direction of movement
and leave the machine in neutral. "N" ap-
pears on the display.
6.1.b - Right-side handlebar controls
(Fig. 13)
4) Accelerator
Turn the handle (4) to activate the ma-
chine's movement and to increase or de-
crease the speed.
5) Solution pump ON/OFF
Turn the switch (5) to "ON" in order to
enable the pump; turn the switch (5) to
"OFF" in order to disable the pump.
1
3b
3b
5
EN - 16
2
3a
3a
4
Fig. 13