Troubleshooting - Ghibli S4 EXPLORER Uso Y Mantenimiento

EN
PROBLEM
The machine does not start
up when the key is turned.
The brush doesn't turn.
The suction unit does not
function.
The machine does dry
properly, leaving traces of
water on the floor.
No water comes out.

TROUBLESHOOTING

CAUSE
Low battery.
Main fuse blown.
Operating speed set to "0"
km/h.
Movement set to neutral.
Recovery tank full.
Level sensors dirty.
Aspirator off.
Aspiration tube blocked.
Recovery tank full.
Squeegee rubber blades
worn.
Tank empty.
The electric pump activa-
tion switch is not set to its
on position.
Tap closed.
Filter clogged.
Water flow set to 0 litres/
minute.
Pump solenoid valve not
functioning.
EN - 32
SOLUTION
Check that the battery is
charged.
Replace the fuse found on
the battery cable.
Increase the operating
speed.
Engage forward or reverse
movement.
Empty the tank.
Clean the recovery tank's
level sensors with a damp
cloth.
Start up the aspirator.
Check and if necessary
clean the aspiration tube
that connects the squeegee
to the recovery tank.
Empty the recovery tank.
Replace or turn over the
squeegee rubber blades.
Fill the tank.
Turn on the switch.
Open the tap beneath the
machine.
Clean the filter.
Increase the water flow.
Call technical assistance.