Safety Devices - Ghibli S4 EXPLORER Uso Y Mantenimiento

EN
Reset Contaresa
Select this function then press and hold down
the SETUP/ENTER button for a few seconds.
The data contained in the "contaresa" screen
will be reset and the message "CONTARESA
RESET" will appear on the screen.
Reduction
This function is necessary for the contaresa.
The cleaning tracks will overlap from one
machine passage to the next and therefore
the calculated yield is not exact.
For this purpose, a reduction percentage can
be configured (set to 0 by default; 5% is rec-
ommended).
Suction unit off delay
This function allows for the suction unit's
shutdown to be delayed after the relative
shutdown button has been pressed.
It serves the purpose of allowing the water present
within the tube to be suctioned completely.
Select the function and then press the
button to increase the time or the
ton to decrease it.
Once the desired time has been set, press the
SETUP/ENTER button to confirm the selection.
Errors list
Select this function and then press the SET-
UP/ENTER button to display the list of the
errors encountered since the last time the list
was reset.
Press the or
through the list. Press the "SETUP/ENTER"
button to exit list and return to the previous
screen.
View data .............................. X (X = 0 or 1)
Select this function and then press the SET-
UP/ENTER button to modify the function then
press the button or the
enable or disable data viewing.
Finally, press the "SETUP/ENTER" button to
confirm the setting:
0 = Viewing disabled.
1 = Viewing permitted.
but-
button to scroll
button to
EN - 20
Language .....................................xxxxxxxx
Select the function then press the SETUP/
ENTER button to display the available lan-
guages. Press the
button to scroll through the list. Press the
SETUP/ENTER button to confirm the select-
ed language.

7.1 - SAFETY DEVICES

(Fig. 18)
WARNING:
The machine is equipped with an operator
presence sensor (1); this sensor blocks
all of the machine's functions and sets
the machine in neutral whenever no op-
erator is present in the driver's seat.
button or the
1
Fig. 18