Troubleshooting And Maintenance - Sanus VLF220 Manual De Instrucciones

6
Adjustments
A
(K)
[03]
6-1
A
[03]

Troubleshooting and Maintenance

To remove the TV: (See illustrations in step 4.)
1. Unscrew the locking screw [13].
2. Push and hold the locking tab (L).
3. Carefully lift the TV from the arm [03], then release the locking tab (L).
TV will not hold the downward tilt position and fl oats upward:
1. Adjust tilt tension setting (see step 6).
2. If the problem persists, use a bracket installation option that uses longer spacers (see step 1-2).
TV will not hold the home position and fl oats downward:
1. Adjust tilt tension setting (see step 6).
2. If the problem persists, use a bracket installation option that uses shorter spacers (see step 1-2).
6901-002111 05
B
B
[23]
A. Adjust left / right swivel tension.
B. Adjust arm extend / retract tension.
C. Adjust up / down tilt tension.
CAUTION:
Never remove the tension knob (K).
B
C
Adjust level.
A. Loosen screws
B. Adjust level
C. Re-tighten screws
C
[03]
[24]
[23]
11