Sanus VLF220 Manual De Instrucciones página 6

1-2
Attach brackets to a TV with a fl at back
1-2
Attach brackets to a TV with an irregular back
1
[01]
[10, 11]
[12]
400 x 400mm
6
In step 1, if you selected the:
M4 x 12mm screw [04] use the M4 washer [14].
M6 x14mm screw [06] use the M6/M8 washer [15].
M8 x16mm diameter screw [08] use the M6/M8 washer [15].
Confi rm that the brackets are level on the back of the TV.
For 400 x 400mm hole spacing: Resecure the locking carriages (c) and insert the
support tubes.
If you require additional space for cables, recesses, or protrusions, choose one of the
confi gurations below.
400 x 400mm
1.
2
2.
If your TV has a curved or obstructed back, or if you need more room to accommodate
[01]
cables, recesses, or protrusions, use either the 14mm, or 24mm spacer [10 or 11].
[10, 11]
[12]
In step 1, if you selected the:
M4 x 30mm screw [05] use the M4 washer [14] and spacer [10].
M6 x 40mm screw [07], use the M6/M8 washer [15] and spacer [11].
M8 x 40mm screw [09], use the M6/M8 washer [15] and spacer [11].
Confi rm that the brackets are level on the back of the TV.
For 400 x 400mm hole spacing: Resecure the locking carriages (c) and insert the support
tubes.
Standard confi gurations are shown. For special applications, or if you are uncertain about your
hardware selection, contact Customer Service.
M4
[10]
Push the shoulder washer [12] through the appropriate openings of the brackets
[01].
Snap shoulder washer [12] into the spacer you selected in step 1-2.
[12]
[05]
[14]
M4/M6/M8
M6/M8
[11]
[01]
[14, 15]
[04, 06, 08]
[12]
[15]
[07, 09]
6901-002111 05