Jocel JF-250LI Manual De Funcionamento página 34

Leveling the Fridge/Freezer
If the Fridge/Freezer is not level, the door and magnetic seal alignment will be affected and
may cause you Fridge/Freezer to work incorrectly. Once the Fridge/Freezer is placed in its
final location, adjust the leveling feet at the front by turning them.
Cleaning before use
Wipe the inside of the Fridge/Freezer with a weak solution of bicarbonate of soda. Then rinse
with warm water using a damp sponge or cloth. Wash the baskets and shelves in warm soapy
water and dry completely before replacing in the Fridge/Freezer. The external parts of the
Fridge/Freezer can be cleaned with wax polish.
Before plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the
Fridge/Freezer.
Before switching on!
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FRIDGE/FREEZER.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30
minutes before switching back on to allow the coolant fluid to settle.
Before filling your Fridge/Freezer
Before storing foods in your Fridge/Freezer, turn the Fridge/Freezer on and wait for 24 hours,
to make sure it is working properly and to allow the Fridge/Freezer to fail to the correct
temperature.
Switching on your Fridge/Freezer
1 Before connecting the Fridge/Freezer to the mains supply position. The
Thermostat control dial is located inside the Fridge compartment.
2 Turn the thermostat knob to the"4"position and turn on electricity. The
compressor and the light inside the refrigerator will begin to work.
3 Wait 24 hours before placing food into the Fridge/Freezer, the temperature
inside your Fridge/Freezer will then be cool enough to chill and freeze foods
sufficiently.
34