Rampage Trailview Tonneau Top Instrucciones De Instalación página 10

Installation Steps
Locate the side straps at the upper corners of the back window. Connect and tighten the straps around the sport bar, thread the end through the buckle as
shown.
39
Note: Straps should be snug and can be tighten later to properly mount.
Insert seat belt through rear window opening and connect hook and loop
flap to close as shown. Repeat on other side.
40
Lay the Tonneau cover upside down to access support bow sleeve. Insert
Tonneau cover support bow into pocket sleeve.
42
Tuck rear window sides into the door surround sides by sliding the plastic
backing into the door surround as shown. Repeat on other side.
Tip: Start at the top and work your way down. Then tuck in small tab at
bottom.
41
Locate the zipper at the bottom of the back window and zip the tonneau cover
to the back window
43
10